IAI America IA-101-X-USBMW - Manual (Page 29)

1. Before
You Begin
21
1.3.2 How to Install the USB Conversion Adapter Driver Software
When a USB port is used, it is required to install USB conversion adapter driver software.
[Compatible software]
• IA-101-X-USB (with USB cable)
• IA-101-X-USBMW (with USB conversion adapter + cable)
• IA-101-TT-USB (with USB cable)
(1) Windows XP, Windows 2000
If using Windows XP or Windows 2000, install it based on the following procedure.
[Refer to (2) Windows 7 or Windows Vista for the Windows 7 or Windows Vista installation procedure.]
[1] Insert the CD-ROM of this software into your CD-ROM drive.
[2] The installed data selection screen (Fig. 1.9) will be displayed.
Click USB Conversion Adapter.
Fig. 1.9 Installed Data Selection Screen
(The displayed screen may vary depending on the version, data in the CD or other factor.)
[3] You are prompted to set the folder of the copy destination. If you use the displayed folder as it is, click
Copy.
To change it, enter it manually or click Browse to set the folder of the copy destination.
On the browse for folder screen (Fig. 1.11), click the folder of the copy destination to select it and then click
OK. Once you have clicked OK, the browse for folder screen (Fig. 1.11) will disappear and the selected
folder path will be displayed on the screen to specify the folder of the copy destination (Fig. 1.10).
Fig. 1.10 Screen to Specify Folder of Copy Destination
Fig. 1.11 Browse for Folder Screen