Anritsu 681XXC - Manual (Page 122)

3-14
SAVING/RECALLING
INSTRUMENT SETUPS The 681XXC offers the capability to store up to ten complete front
panel setups. The setups are numbered 0 through 9. The following
paragraphs describe how to save and recall front panel setups.
Saving
Setups Once you have decided that an instrument setup
should be retained for future use, follow the proce-
dure below to save it.
First, press SYSTEM to display the System Menu.
Now, press Setups . The Setups Menu (below) is dis-
played.
Press Save , then enter the desired setup number
(between 0 and 9) on the keypad. The setup is now
saved.
NOTE
Setup #0 automatically saves the current
front panel settings when the instrument
is shutdown using the front panel
LINE
key. Therefore, it is recommended that
you use only setups #1 through #9 to save
front panel setups.
When instrument shutdown occurs be-
cause of main power interruptions, the
current front panel settings are not
saved.
Recalling
Setups To recall a previously saved setup, first access the
Setups Menu as described above.
At the Setups Menu, press Recall , then enter the
setup number on the keypad.
The instrument resets itself to the recalled configu-
ration.
681XXC OM 3-89
LOCAL (FRONT SAVING/RECALLING
PANEL) OPERATION INSTRUMENT SETUPS