Anritsu 681XXC - Manual (Page 84)

Use the cursor control key to select a power level
from the level list. The selected power level is high-
lighted in reverse video and displayed in full below
the level list.
Press Tag to mark a selected power level (place an
L in front of it). If a power level is already tagged,
pressing Tag will untag it (remove the L ). Tagging
selected power levels lets you quickly switch be-
tween them using the scan keys of the Tagged Lev-
els menu.
Press Edit to edit the selected power level or enter
a new power level.
Press Output Level to output the selected level.
This power level is output until you select another
level from the list and press
Output Level . On the
level list, the output power level selection is marked
by a black square or, if tagged, an
L highlighted in
reverse video.
When you are finished , press Previous Menu to re-
turn to the Level Control Menu display.
Scanning Tagged Levels–To go to the Tagged Lev-
els menu (shown below) from the Level Control
menu, press
Tag Lvl Menu .
This menu lets you select the tagged power levels
for output using the
Scan Up and Scan Dn keys.
Return to the Level Control Menu display by press-
ing
Previous Menu .
681XXC OM 3-51
LOCAL (FRONT FIXED POWER
PANEL) OPERATION LEVEL OPERATION