Anritsu 681XXC - Manual (Page 147)

Chapter 5
Operation Verification
5-1
INTRODUCTION This chapter contains three operation verification tests that can be
used to verify Series 681XXC Synthesized Signal Generator operation.
Setup instructions and performance procedures are included for each
test. The results can be compared with the specified limits that are
shown on the test record forms that are provided for each test.
5-2
TEST EQUIPMENT Table 5-1 lists the recommended test equipment for performing the
operation verification tests in this chapter.
5-3
TEST RECORDS Tables 5-2 and 5-3 contain test record forms that can be photocopied
and used to record the results of operational verification testing of
your 681XXC. These tables are included as part of the operational
verification test procedures and contain test information for all
681XXC models.
681XXC OM 5-3
Instrument Critical Specification
Recommended
Manufacturer/Model
Frequency
Counter,
with
Cable Kit
and
External Mixer Range: 0.01 to 65 GHz
Input Z: 50
W
Resolution: 1 Hz
Other: External Time Base
Input
EIP Microwave, Inc. Models 538B,
548B, or 578B,
with
Cable Kit: Option 590
and
External Mixer:
Option 91 (26.5 to 40 GHz)
Option 92 (40 to 60 GHz)
Option 93 (60 to 90 GHz)
Power Meter,
with
Power
Sensors Range: –30 to +20 dBm
(1
m W to 100 mW)
Anritsu Model ML2437A or ML2438A,
with
Power Sensors:
MA2474A (0.01 to 40 GHz)
MA2475A (0.01 to 50 GHz)
Oscilloscope Bandwidth: DC to 150 MHz
Vertical Sensitivity: 2 mV/
division
Horiz Sensitivity: 50 ns/
division Tektronix, Inc. Model TAS485
Table 5-1. Recommended Test Equipment