HT instruments SIRIUS89N - Manual (Page 29)

SIRIUS89N
EN - 27
6.3.2. Measurement procedure
1. Select the desired test parameter by means of the
F1, F2, F3, F4 key.
2. Connect the Black, Green and Blue connectors of the three-terminal shuko cable or
of the split cables to the corresponding input terminals of the instrument B1, B3, B4
Instrument connection for 230V single-phase
RCD check
Instrument connection for 400V + N + PE three-
phase RCD check
Instrument connection for 400V + N (no PE) three-
phase RCD check
Instrument connection for 400V + PE (no N)
three-phase RCD check
3. Connect the shuko plug or the Test leads to the System under test according
with one of the picture above.