Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 111)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 111
1. To upload an image click the Browse button.
2. Locate and select the map file (.jpg) that you have previously created and saved. Click the Open button. The path and name
of the map file displays in the field to the left of the Browse button.
3. Click the Upload button.
The Upload button displays a Please Wait message while the file uploads. The upload should take about seven seconds. Once the
image of the map has uploaded, the RIM-1000 displays a message confirming that it has uploaded the new file.
Figure 3.53 Map Image Upload Message
If the file did not upload, you will receive the following error message:
Figure 3.54 Map Image Upload Error Message
Verify your file’s size and type, and repeat the upload process.
4. Once the file has uploaded, click Return to exit to the Map File Configuration Menu.
5. Return to the RIM-1000 home page. Click the Floor Map link at the top right side of the page to view your uploaded map image and
ensure it has uploaded correctly.
Map Inputs
Once the map image has been uploaded, you’re ready to designate inputs on the map.
Throughout the mapping process, you will use a blue box to designate the location of your mapped inputs. This blue box represents
the location of the point you are mapping, and its blue color indicates you are in mapping configuration mode. Initially, you will find it in the
upper left corner of your screen. Use your mouse to drag and drop it where you’d like it to appear on your map.
Figure 3.55 RIM-1000 Drag and Drop Mapping - Configuration Mode