Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 60)

Remote Infrastructure Management System - Version 1.0 / July 2014
60 www.chatsworth.com
Table 3.5 System Configuration Options
Option Description
Default URL
Designate the view you’d like to see when you type the IP address of the RIM-
1000 into your browser’s display bar.
• Home Page - displays the RIM-1000’s home page (IP/index.htm)
• Alarms Page - displays the alarms page (IP/alarms.htm)
• RIM-1000 Nest Map - displays the RIM-1000 nest map page
• Floor Map - displays the map loaded into the RIM-1000 as Map Image#1. Go to
the Configuration>Map page to upload an image.
Input Groups
Individual inputs can be organized into groups, and can be displayed in their
grouped configuration on the RIM-1000’s home page.
Activate the Input Groups display option on this configuration page.
Enabled - Horizontal will display the groups together in rows.
Enabled - Vertical will display the groups together in columns.
Then go to the Configuration> Inputs and Relays page and click the Input Group
Labels link. That is where you will specify names for up to 8 input groups.
Then click on the individual inputs to place them into the groups. Each input has a
Group Assignment field near the bottom of its configuration page. Enter the num-
ber, 1-8, of the group you’d like the input placed into.
On each page, be sure to click the Submit Changes button to save
the changes.
When you return to the RIM-1000’s home page, you should see your inputs prop-
erly grouped within the main body of the page.
Button Controlled
Relay Password
An individual relay can be configured as button controlled - do this on the specific
relay’s configuration page. This allows a relay to be activated by clicking a button
on the web interface. This button will appear next to the relay on the Relays
page.
If you wish, you can password protect the button so only users with the password
can push the button. Set that password here.
Exit to Bootloader
Click this link to access the RIM-1000’s bootloader.
This features should be reserved for system updates and troubleshooting, and
should only be accessed by individuals with the technical knowledge to use this
feature.