Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 207)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 207
A P P E N D I X
H
SNMP v3
When the Falcon RIM-1000 has the optional SNMP v3 software installed, it can communicate with SNMP servers running version 3.
To configure the RIM-1000 for SNMP v3, follow the steps in this appendix.
1. From the top bar of the RIM-1000 Web interface, select the Configuration Menu, then select the SNMP/Syslog link from the menu.
Figure H.1 SNMP/Syslog Configuration Page
2. In the MIB-2 section, enter the basic system information, such as System Name, System Contact, and System Location.