Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 75)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 75
Table 3.14 Modem/Phone Numbers/Pagers Configuration Options
Option Description
Pager Baud Rate
Allows users to determine the connection speed. Select 300, 1200,
2400, 9600, or 33.6k.
Default: 1200
Pager Bits/Parity
Allows the user to set the pager communications settings. Select 7
bit, even parity or 8 bit, no parity to match the settings of the pager
service provider's TAP service phone number.
Pager Resend
Yes: When the RIM-1000 sends an alarm notification, it will send all
unacknowledged alarms in the Alarm History Menu.
No: When the RIM-1000 sends an alarm notification, it will send only the last
unacknowledged alarm. The RIM-1000 will also auto-acknowledge all alarms
associated with that particular pager once a successful page has occurred.
Default: No
Modem Password
Defines a remote access password, seven characters maximum. The password is
used when remotely logging into the RIM-1000 through a modem.
Redial Attempts
Determines the number of times (1–255) to call a number until the
call is successful. Enter 0 to disable this function.
Redial Interval
Establishes the number of minutes (1–-255) to wait between
redials. Enter 0 to disable this function.
Force Alarm
Acknowledge Code
Establishes a code that acknowledges all unacknowledged alarms. This acts as a
master code and can override all other alarm acknowledge codes.
Default: None (left blank)
Pager Message Strip
Timestamp
Check to remove the alarm timestamp from the pager message.
This reduces the size of the pager message as the user can estimate when the
alarm occurred based on when the page was received.
Default: unchecked