Chatsworth Products Remote Infrastructure Management (RIM-1000) User Manual
Page 42
Remote Infrastructure Management System - Version 1.0 / July 2014
42
www.chatsworth.com
Figure 3.5 RIM-1000 Input Configuration Menu
Inputs and relays located on expansion cards are identified by their name and slot channel number, referred to in the Inputs table
as S.Ch. For example, an input with a S.Ch number of 1.9 is located on the expansion card in slot one, and is the 9th input on that
card. An input with a S.Ch number of 4.2 is located on the expansion card in slot 4, and is the 2nd input on that card. If an input
has no S.Ch number, that means it is located on the RIM-1000’s main card.
Relays work the same way. A relay with no S.Ch number is located on the RIM-1000’s main board. A relay with an S.Ch number
of 1.4 is located on the expansion card in slot 1, and is the 4th relay on that card.
Clicking an input link will display one of three input configuration pages - each card has its own configuration page. Only the options
available for the particular inputs on the card will be displayed.
Relay configuration works the same way. Click a relay link to display that relay’s configuration information. Only the configuration
options available for that particular relay will appear.