Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 26)

Remote Infrastructure Management System - Version 1.0 / July 2014
26 www.chatsworth.com
2.2.4 Keypad Connection
The RIM-1000 can be configured with a 3 x 4 keypad interface. Entering a user code, configured through software, activates a relay output
which unlatches a door and allows an individual to enter the secure area. Entering the correct user code can also trigger a relay output
to signal an IP camera to snap a picture and email it to a predefined recipient. Connect the keypad as shown in Figure 2.6. For more
information on configuring the keypad function, see 4.15., “Keypad/DTMF Access Users” on page 77.
Figure 2.6 Keypad Wiring
2.2.5 EIA-232 COM2 Connection
The EIA-232 port can be connected to a PC for IP configuration, firmware downloads, and troubleshooting. It is typically a temporary
connection. Connect the straight through, 9-pin, cable as shown in Figure 2.7.
Figure 2.7 EIA-232 COM2 Connection