Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 27)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 27
2.2.6 RJ11 Phone Line Connection
The RIM-1000 may contain an optional internal modem (P/N 60104-001 must be ordered separately) for dial in and dial out capabilities.
The modem can be used for:
• Email notification through an Internet Service Provider (ISP).
• Remote connection to accomplish a variety of tasks, including: viewing alarms, changing IP Configurations, and acknowledging alarms.
• Remote alarm acknowledgment and access through DTMF. This allows a user to dial the RIM-1000 from a touch tone
telephone-standard phone or cell phone-and enter an acknowledgment code or access code.
• Pager notification to an alpha-numeric pager or cell phone (TAP changer).
2.2.7 RJ45 Ethernet Connection
The RIM-1000 has an internal 10/100BASE-T Ethernet port used to configure and monitor the RIM-1000. The Ethernet port supports Web
browser access, email (SMTP), BACnet slave, Modbus slave, SNMP, BACnet master and Modus master. Figure 2.6 and Figure 2.7 show the
physical connections. Figure 2.8 shows a direct connection between the RIM-1000 and a PC using the crossover cable supplied with the
RIM-1000. Figure 2.9 shows a typical RIM-1000 connection on a subnet using a hub or switch and straight through CAT5 cables.
Figure 2.8 RIM-1000 Ethernet Connection to a PC using a Crossover Cable
Figure 2.9 RIM-1000 Ethernet Connection to a PC on a Subnet