Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 58)

Remote Infrastructure Management System - Version 1.0 / July 2014
58 www.chatsworth.com
3.4.3 System
The System link lets you configure many of the RIM-1000’s home page display options.
Figure 3.12 System Configuration
Table 3.5 System Configuration Options
Option Description
MAC Address
This field displays the MAC address, which is assigned to the RIM-1000
by the manufacturer. This field is uneditable, and is intended for
reference only.
IP Address The RIM-1000’s IP address. If necessary, adjust the IP address here.
System Name
Designate a name for the RIM-1000. This name appears on the upper
left corner of the web interface, under the main horizontal menu.
The system name is also included as part of email notifications.
Web Title Bar Text
You can control the text that appears in the title bar of the web
browser, and also on the tab for the web interface’s web page.
Web Refresh Rate
The web refresh rate is the amount of time the system waits until it
updates the web interface with current data. Typical setting are
between 15 and 30 seconds.
DO NOT set the refresh rate between 1 and 5 seconds. This can
cause the screen to freeze or lock up.
If the refresh rate is set to 0 the RIM-1000 will not refresh at all. Users
must set a refresh rate in order for the system to automatically
update.
Default setting: 0 seconds