Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 91)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 91
3.4.21 SNMP/Syslog
Use this page to configure SNMP and Syslog notification options.
Figure 3.36 SNMP Configuration Page
Table 3.24 SNMP Configuration Options
Option Description
System Name
Designate a unique name for this RIM-1000. This name appears on the RIM-1000
Main Menu and is included as part of email and pager notifications.
The System Name can also be viewed and changed in the System
Configuration Menu.
System Contact
This is the individual responsible for the RIM-1000. This system contact
identifier is only available through SNMP Gets and is not included in
email, pager, or SNMP Trap notifications.
System Location
List the physical location of the RIM-1000. It is used to help identify the
RIM-1000 when viewing the web pages. The System Location is not
included in email, pager, or SNMP Trap notifications.
Select SNMP Trap
Type Select the SNMP version that best suits your needs; V1-Trap, V2CTrap,
and V2C-Inform.
Persistent Trap/
Inform Interval
This feature allows the RIM-1000 to issue continuous SNMP Traps until an alarm
acknowledgement is received by the RIM-1000 or until the alarming point returns
to normal. The SNMP Traps do not include any delivery verification. Traps can be
acknowledged from the Alarm Management page.
A Persistent Trap setting of 5 or 10 minutes will trigger the RIM-1000 to send the
Trap on a regular interval in case the previous Trap did not reach the Network
Management System (NMS). Typically, the NMS can be set to ignore duplicate
Traps to prevent re-alarming at the NMS.
This user-defined time interval is set in minutes. Enter 0 to send the
message just once.