Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 157)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 157
C H A P T E R
6
REMOTE ACCESS
6.1. Remote Access Configuration
The RIM-1000 can be remotely accessed with any terminal emulation software package. To establish a proper dial-out session,
set the appropriate modem port as follows:
• 33.6K baud
• NO parity
• 8 bits
• 1 stop bit
• (2400/N/8/1)
• No software or hardware flow control
Once the proper settings are made, dial the phone number assigned to the RIM-1000. Once communication is established, press Enter.
A login prompt displays on the screen. Leave the username field blank. Type the password and press Enter. The session begins.
Note: The factory default password is cpi (case-sensitive).
Type a question mark (?) to view the Help Menu. To terminate the session, execute the command in the software package
that disconnects the modem. The commands for accessing the system remotely are identical to the ones described in 2.3.1,
“Set the RIM-1000 IP Address” on page 33.