Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 37)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 37
C H A P T E R
3
WEB INTERFACE CONFIGURATION
The RIM-1000 Web interface provides a convenient way to check and monitor the RIM-1000 status through a web browser.
To access the RIM-1000 web interface, you must first have configured the RIM-1000 to communicate on your network. If you haven’t done
this already, refer to Chapter 2, “Communication” on page 33.
Once the RIM-1000 is communicate on your network, type the IP address of the RIM-1000 into the location bar of the Web browser.
When the prompt appears, enter the RIM-1000’s default user name (cpi) and password - the RIM-1000 is shipped without a password
so leave this field blank.
Press Enter.
3.1. Home Page
The top of the page provides links to other pages for additional monitoring, control and configuration. The sections in this chapter
will explain the functionality available on each screen within the web interface.
The main page within the web interface acts as a dashboard for the RIM-1000. This page is highly customizable - you can change
everything from the logo to the way the inputs display in the middle of the page, to the interactive map and camera view that can
occupy the space on the right side of the dashboard. Many of the home page specific options are configured via “System” on page 58.