Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 160)

Remote Infrastructure Management System - Version 1.0 / July 2014
160 www.chatsworth.com
7.2. Configure the PC
Now the user is ready to configure the PC they will be dialing in from. These directions were written from a Windows XP machine.
To configure the PC:
1. Click on Start, Control Panel, then Network. Select New Connection.
2. When the Internet Properties window appears, select the Connections tab at the top of the window and click on the Setup
button to start the New Connection Wizard.
3. Click the Next button to begin the Wizard.
4. Select Connect to the Internet and click the Next button.
5. Select the Set up my connection manually button and click Next.
6. Select the Connect using a dial-up modem button and click Next.
7. Type “RIM-1000” as the name of the Internet Service Provider (ISP) in the space provided and click Next.
8. Enter the phone number of the phone line that connects to the RIM-1000. Click the Next button.
9. Enter the RIM-1000 Modem User name and Password and click Next.
10. Add a shortcut to the desktop. Click the Finish button. Use this desktop shortcut to establish a PPP connection with the RIM-1000.