Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 142)

Remote Infrastructure Management System - Version 1.0 / July 2014
142 www.chatsworth.com
Table 4.6 Individual Modbus Register Configuration Options
4.5.2 Read/Preset Modbus Register
The Read/Preset Modbus Register link at the bottom of the Modbus Slave Unit Configuration page displays the following. This page
reads or writes individual registers for troubleshooting and for configuring Slave parameters.
Figure 4.11 Read/Preset Single Register Page
Option Description
Map Box Size
Customize the size of the mapped object. By default, the height of
the object, as it appears on the map, is approximately 20 pixels,
and the width automatically adjusts to the length of the text. This
setting allows users to expand the size of the object to fill a defined area.
Map Coordinate
Fine tune the location of the object on the map. Refer to “Map
(Facility Mapping)” on page 109 for further information.
Graphical Mapping
Designate the device’s location on the RIM-1000 graphical map. Refer to
“Map (Facility Mapping)” on page 109 for further information.
Test Map View the mapped location of the point you’re currently configuring.