Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 161)

Remote Infrastructure Management System - Version 1.0 / July 2014
Chatsworth Products, Inc. (CPI) • 800-834-4969 161
C H A P T E R
8
LOAD FIRMWARE AND CONFIGURATION DATA
8.1. Load RIM-1000 Firmware
You can download current versions of firmware from CPI’s web site at www.chatsworth.com/support-and downloads/downloads/software.
It is important to confirm the correct version of firmware before downloading and installing it. Check the Identity tab for the Firmware
and Boatloader version loaded on your device and be sure the new firmware is a later version.
• RIM-1000-X/RIM-1000-XXXX With Bootloader 2.x.x supports firmware version 8.3.x only.
• RIM-1000-X/RIM-1000-XXXX With Bootloader 3.x.x supports firmware version 8.4.x only.
8.1.1 Load Firmware Through the Web Interface
1. Download firmware for the RIM-1000 from CPI’s web site at www.chatsworth.com/support-and downloads/downloads/software.
2. Firmware downloads in a .zip compressed file. Extract the firmware (a .bin file) from the zip.
Warning
DO NOT ATTEMPT TO LOAD THE WRONG FIRMWARE ONTO THE RIM-1000. If you have any questions regarding
firmware compatibility, contact CPI Technical Support (800-834-4969). The firmware load procedure involves using
the MIME (multipurpose Internet mail extensions) standard from the RIM-1000 web interface. To load firmware to the
RIM-1000: