Eppendorf epBlue with MultiCon - Manual (Page 121)

epBlue settings - Checking components and making the basic settings
epBlue™ with MultiCon
English (EN)
121
11.3.1 Lock the tool
1. Slide the tool into the tool holder from below.
2. Hold the tool tightly At the same time, press the Lock button.
The tool holder locks the tool.
11.3.2 Unlocking the tool
1. Hold the tool tightly. At the same time, press the Unlock button.
The tool holder unlocks the tool.
2. Remove the tool.
11.4 Dosing device
The Dosing device function can be used to read out the number of stroke movements of a dispensing tool.
Abb. 11-3: Dispensing Device function
Fig. 11-3: Dispensing Device function
11.4.1 Reading out the tool
Prerequisites
A tool is in the tool holder.
 To read out the tool data, click on the Read button.
Tool used
Name of the tool
Tool path
Path of the labware definition of the tool
Strokes
Number of stroke movements of the dispensing
tool