Eppendorf epBlue with MultiCon - Manual (Page 60)

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
60
6.3.4 Pool command
The Pool command can be used to combine liquids from several source positions in one or more destination
positions.
Abb. 6-14: Principle of the Pool command
Fig. 6-14: Principle of the Pool command
The windows and functions of the Pool command are identical with the Sample transfer command (see
p. 48).
If you are using the Multiaspirate function, liquid will be removed from the source positions until the pipette
tip is filled. The contents will then be dispensed in the destination position. In the pattern, you define which
source positions will be pooled in the destination position.
The Number of samples command before the Pool command defines the number of source positions.
Options > Change Tips is set to before asp. for next destination well .
6.3.5 Pool one destination command
The Pool one destination command can be used to combine liquids from several source positions in one
destination position. This command is a simplified Pool command.
The Number of samples command before the Pool one destination command defines the number of source
positions.
The Options > Change Tips option is set to when command finished . The pipette tips are ejected at the end of
the command.