Eppendorf epBlue with MultiCon - Manual (Page 41)

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
41
6.2.4 Saving an application
 To save an application, click on the symbol in the toolbar.
 To save an application under a new name, click on the symbol in the toolbar.
 To save all open applications, click on the symbol in the toolbar.
6.2.5 Positioning labware
6.2.5.1 Positioning the labware on the epBlue worktable
Labware can only be positioned at specific locations. Information on positioning the labware can be found
in the hardware operating manual.
Abb. 6-3: Positioning the labware on the epBlue worktable
Fig. 6-3: Positioning the labware on the epBlue worktable
Labware Category column
Overview of all labware types.
Worktable area
epBlue worktable with positioned labware.
Switch to procedure button
To go to the Procedure window, press the
Switch to procedure button.
Trash
Delete the selected labware from the epBlue
worktable.
Labware area
Labware that can be positioned on the epBlue
worktable.
Properties area
Properties of the selected labware.
Placed Labware column
Labware positioned on the epBlue worktable.