Eppendorf epBlue with MultiCon - Manual (Page 27)

epBlue Application Runner - Carrying out the application
epBlue™ with MultiCon
English (EN)
27
4.2.2 Entering the sample quantity
Abb. 4-3: Process control window
Fig. 4-3: Process control window
The window Process control appears if the sample quantity in the application is variable.
1. Enter the sample quantity for the current run.
2. Press the OK button.
4.2.3 Setting the HEPA air filter and the UV lamp
Abb. 4-4: Setting the parameters for the HEPA air filter and the UV lamp
Fig. 4-4: Setting the parameters for the HEPA air filter and the UV lamp
If your epMotion is equipped with a HEPA air filter and UV lamp, you can define the settings for the HEPA
air filter and the UV lamp.
 Activate or deactivate the HEPA air filter.
 Define whether a decontamination is to be carried out before the application.
The worktable may only be decontaminated if no labware or tools are present on the worktable.