Eppendorf epBlue with MultiCon - Manual (Page 33)

epBlue Application Runner - Carrying out the application
epBlue™ with MultiCon
English (EN)
33
Tab. 4-1: Meaning of the columns in the Volume table
Proceed as follows:
 Enter the filling volume into the Start Volume column.
 To enter the same volume for the entire labware, click on the title in the Volume column.
 Enter the run parameters of the optical sensor in the Liquid detection area, if necessary.
 Press the Run button.
Column Meaning
Red border Entry of an invalid volume. Invalid volumes are volumes that are smaller than the
required volume or larger than the maximum volume of the labware.
Position Position of the labware on the worktable.
Minimum volume Volume that is required for this run.
Start Volume Actual volume in the labware.
Maximal Volume Maximum volume the labware can be filled with.