Eppendorf epBlue with MultiCon - Manual (Page 140)

epBlue Settings - Saving data and creating print templates
epBlue™ with MultiCon
English (EN)
140
Proceed as follows:
Prerequisites
• epBlue is started.
• You are logged in as administrator.
1. Click on the Settings symbol on the start screen.
2. Select Backup .
The Backup window appears.
3. Press the button.
4. Select the folder the backup will be saved to.
A name for the backup is automatically assigned.
5. Use that name for the backup or select a new name.
6. Start the backup using the Backup button.
13.1.2 Creating an automatic backup
Proceed as follows:
Prerequisites
• epBlue is started.
• You are logged in as administrator.
1. Click on the Settings symbol on the start screen.
2. Select Backup .
The Backup window appears.
3. Check the Create full Backup every checkbox.
4. Enter the time in days after which an automatic backup is to be performed.
5. Click on the button.
6. Select the folder the automatic backup will be saved to.
7. To reset the entries, press the Reset button.
8. To start the backup, press the Apply button.
Destination selection area
Location where a backup copy will be saved
Status field
Shows if the software is ready or damaged
Progress bar
Progress of backup
Details field
Information on backup
Backup button
Starts the data backup