Rockwell Automation 21G PowerFlex 750-Series AC Drives - Manual (Page 128)

128 Rockwell Automation Publication 750-IN001N-EN-P - April 2014
PowerFlex 750-Series AC Drives
3. Engage and tighten the capture screws to lock the drive assembly or power
option assembly to the Stop.
4. Release the retaining clips to roll the drive assembly or power option
assembly away from the cabinet.
ATTENTION: The drive assembly and power option assembly have a high center of
gravity and a tip over hazard exists. To guard against death, serious personal injury,
and/or equipment damage, do not subject the drive assembly or power option
assembly to high rates of acceleration or deceleration while transporting. Do not push
or pull above the points indicated.
IMPORTANT Take precautions when using the Roll-out Cart to move the drive.
• Only use the Roll-out Cart to move the drive or power option a short distance in
order to gain access to the cabinet interior.
• Do not attempt to move the drive or power option on the Roll-out Cart with the
handle alone. The Roll-out Cart handle is designed for positioning the empty cart.
• Only use the cart on a smooth and level surface.
• Verify the path for the cart is clear of debris and obstacles.
• Avoid sloped and rough surfaces.
• Always move the drive or power option slowly.