Rockwell Automation 21G PowerFlex 750-Series AC Drives - Manual (Page 6)

6 Rockwell Automation Publication 750-IN001N-EN-P - April 2014
PowerFlex 750-Series AC Drives
Commonly Used Tools Installation and Service Tools
This list covers the tools needed for drive installation.
IMPORTANT Care must be taken to be sure that tools and/or hardware components do not fall into
open drive assemblies. Do not energize the drive unless all loose tools and/or hardware
components have been removed from the drive assemblies and enclosure.
Tool Description Details
ESD-protected place of work Working surface, Floor covering, seat and ground connections
ESD-protective clothing Wrist wrap, shoes, overall clothing (coat)
Multi meter Digital multi meter, capable of AC and DC voltage, continuity, resistance,
capacitance measurements, and forward diode bias tests. Fluke model 87 III or
equivalent.
Allen socket wrench 4 mm, 5 mm
Allen socket wrench extension 254 mm (10 in.)
Flat nose screw driver 5 mm (0.19 in.), 6.4 mm (0.25 in.), 9.5 mm (0.375 in.), #1, #2
Hexalobular screw driver/bit #15, #20, #25, #40, #45
Hexagonal socket wrench 7 mm, 8 mm, 10 mm, 12 mm, 13 mm, 17 mm, 18 mm
Combination wrench 10 mm, 17 mm
Phillips® screw driver/bit (1)
(1) Phillips and Pozidriv are registered trademarks of the Phillips Screw Company.
#2, 492-C
Pozidriv®
(1)
#2, M3 x 7
Torque wrench 1...12 N•m (8.8…106 lb•in)
Torque wrench 6...50 N•m (53…443 lb•in)
Roll-out cart 20-750-CART1-F8
Note: The roll-out cart is required to remove the Frame 8 and larger drive
assembly from the enclosure.