Rockwell Automation 21G PowerFlex 750-Series AC Drives - Manual (Page 43)

Rockwell Automation Publication 750-IN001N-EN-P - April 2014 43
PowerFlex 750-Series AC Drives
Join the Cabinets
12. Pass the M8 x 16 mm hex-head thread-forming screws from inside the
wiring bay through the clearance holes and start to engage the screws with
the holes in the power options bay.
Make sure the cabinets are level and aligned and pushed tightly together.
13. Lightly tighten the screws in a uniform pattern.
Torque screws labeled ➊ to 11.3 N•m (100 lb•in).
Torque screws labeled ➋ to 9.0 N•m (80 lb•in).
IMPORTANT Do not use hardware to draw cabinets together.
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
➊
600
(23.6)
800
(31.5)
➋ ➋
➋
➋ ➋
➋ ➋
➊ ➊
➊ ➊ ➊
➊ ➊ ➊ ➊ ➊ ➊
➊ ➊ ➊ ➊