Aiwa RX-N939U User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE SLEEP TIMER
PROGRAMACIÓN DEL CRONODESCONECTADOR
REGLAGE DU TEMPORISATEUR
V *■
When the sleep function is used, the power
automatically turns off at a time specified between
99 and 10 minutes.
Empleando la función de crondesconexión, la
alimentación
dei
sistema
se
desconectará
automáticamente después del tiempo especificado
entre 99 y 10 minutos.
La fonction temporisateur permet d’éteindre
automatiquement la chaîne au bout d’un temps
spécifié entre 99 et 10 minutes.
1
,
1
Press the SLEEP button.
Presione el botón SLEEP.
Appuyez sur SLEEP.
-X
SLEEP
SLEEP
Set the desired time.
Programe el tiempo deseado.
Réglez le temps souhaité.
Each press reduces the time by ten minutes.
When the set time is reached, the power
automatically turns off.
Cada vez que lo presione, el tiempo disminuirá diez
minutos.
Cuando legue la hora ajustada, la alimentación se
desconectará automáticamente.
Chaque pression diminue le temps de dix minutes.
Lorsque le temps est écoulé, la chaîne s’éteint
automatiquement.
99 ^ 90 ^ 80
-------> 20 -> 10 -
Cancel
----------- Desactivado <------------------
Disattivato
-X
To change the time
Press the SLEEP button until the desired time is
displayed.
To cancel the sleep timer function______ ^
Press the SLEEP button until theiSLEEPi indi
cator goes out.
If the source function is changed while the
sleep timer is working
The sleep timer is still in effect as long as the
ISLEEPI indicator is displayed.
If the SLEEP button is pressed while the power
is off
The power is turned on and the sleep function is
activated.
Para cambiar el tiempo
Presione el botón SLEEP hasta que se visualice
el tiempo deseado.
Para cancelar la función de cronodesconexión
Presione el botón SLEEP hasta que desaparezca
el indicador ISLEEPl.
Si cambia la fuente mientras el crono-
desconectador esté en funcionamiento
El cronodesconectador seguirá en efecto mientras
el indicadorfSLEEPIesté visualizado.
Si presionael botón SLEEP con la alimentación
desconectada
La alimentación se conectará y se activará la
función del cronodesconectador.
Pour modifier le temps
Appuyez sur SLEEP jusqu’à ce que le temps
souhaité soit affiché.
Pour annuler la fonction temporisateur
Appuyez sur SLEEP jusqu'à ce que l’indicateur
ISLEEPI s’éteigne.
Si vous changez la fonction source pendant le
fonctionnement du temporisateur
Le temporisateur continue de fonctionnertant que
l’indicateurlSLEEPI est affiché.
Si vous appuyez sur SLEEP quand la chaîne
est éteinte
La chaîne s’allume et la fonction temporisateur
est activée.
62