Aiwa RX-N939U - Manual (Page 68)

STEREO INTEGRATED AMPLIFIER/STEREO TUNER RX-N939
<FM sectior»
Frequency range
Usable Sensitivity (iHF)
Alternate channel selectivity
Signal-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<AM section>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
<Timer section and general>
Program timer
Sleep timer
<Amplifier section>
Power output
87.5 MHz to 108 MHz
1.3 m V (75 ohms) 13.2 dBf
50 dB (±400 kHz)
STEREO 68 dB
MONO 72 dB
0.3% (MONO), 1 kHz
0.8% (STEREO), 1 kHz
20 Hz to 15 kHz (+0.5 dB,-
33 dB at 1 kHz
75 ohms (unbalanced)
■3dB)
530 (531) kHz to 1,710 (1,602) kHz
400 MV/m
23 dB (9 kHz)
53 dB (100 dB input)
Loop antenna
“ONCE” and/or “EVERY” (independent setting)
Capable of setting in 10 minute increments,
99 minutes maximum
FTC RULE
Front: 35 watts per channel, Min. RMS at
6 ohms
Rear: 7.5wattsperchannei, Min.RMSatIBohms
Center: 15 watts, Min. RMS at 8 ohms
From 65 Hz to 15 kHz, with no more than 1 % Total
Harmonic Distortion
0.1% (17.5 W, 1 kHz, 6 ohms)
Input sensitivity (load impedance)
VIDEO 1/DAT: 300 mV (47 kohms with volume)
VIDEO 2/AUX: 500 mV (47 kohms)
SUPER WOOFER: 1.5V
120 VAC, 60 Hz
125 W
260 X 198 X 330.5 mm (10 Vi x 7 7s x 13 Va in.)
7.0 kg (15.4 lbs.)
Harmonic distortion
Output terminal
Power requirements
Power consumption
Dimensions (W x H x D)
Weight
SPEAKER SX-N939
Cabinet type
Impedance
Music power
Speaker
Output sound pressure level
Dimensions (W x H x D)
Weight
COMMON SECTION
Power requirements
Power consumption
Dimensions (W
x H x D)
Weight
Accessories
3-way, bass reflex (EIAJ magnetically shielded)
6 ohms
60 W
130 mm (5 Ve in.) cone type woofer
60 mm (2 7a in.) cone type tweeter
20 mm ('Via in.) ceramic type super tweeter
87 dB/W/m
215 X 396 X 240 mm
(8 '/2 X 15 Va
X 9 '/2 in.)
4.4 kg (9.7 lbs.)
120 VAC, 60 Hz
System total: 140 W
Vertical placement
690 X 396 X 330.5 mm
(27
'/4
X 15 Vex 13 '/a in.)
Horizontal placement
950 X 396 X 330.5 mm
(37 '/ 2 X 15 Vax 13'/ain.)
20.3 kg (44.7 lbs.)
FM feeder antenna (1)
AM loop antenna (1)
Remote control (1)
Operating instructions (1)
• Specifications and externai appearance are subject to change without
notice.
• Doiby noise reduction manufactured under iicense from Doiby
Laboratories Licensing Corporation.
• “DOLBY” and the doubie-D symboi □□ are trademarks of Dolby
Laboratories Licensing Corporation.
• The word “BBE” and the “BBE symbol” are trademarks of BBE Sound,
Inc.
• Under license from BBE Sound, Inc.
Note
Please check the laws on copyright related to recordings from discs, radio
or externai tape for the country in which the machine is being used.
STEREO CASSETTE DECK/COMPACT DISC PLAYER FD-N939
<Cassette deck section>
Track format
4 tracks, 2 channels
Frequency response Metal tape: 20-17,000 Hz
СгОг1аре: 20-16,000 Hz
Normal tape: 20 - 15,000 Hz
73 dB (Dolby C NR ON, metal tape peak level
above 5 kHz)
0.12%(WRMS)±0.19%(WPEAK)
4.8 cm/seo. (17s ips)
9.5 cm/sec. (double speed)
AC bias
AC erase
DC servomotor x 1
Playback head x 1 (deck 1)
Record/playback/erase head x 1 (deck 2)
Signal-to-noise ration
Wow and flutter
Tape speed
Recording system
Erase system
Motor
Heads
<Compact disc player section>
Disc
Scanning method
Laser
Rotation speed
Error correction
D-A conversion
Signal-to-noise ratio
Harmonic distortion
Wow/flutter
Dimensions (W x H x D)
Weight
Compact disc
Non-contact optical scanner (with semi-conductor
laser)
Semi-conductor laser {X = 780 nm)
Approx. 500 rpm - 200 rpm (CLV)
Cross Interleave, Reed Solomon code
1-bit DAC
90 dB (1 kHz)
0.03% (1 kHz)
Unmeasurable
260 X 198 X 328 mm (10.40 x 7.92 x 13.12 in.)
4.5 kg (9.9 lbs.)
68