Datasheet, Stratix v avalon-st interface for pcie datasheet – Altera Stratix V Avalon-ST User Manual

Page 2

Advertising
background image

Datasheet

1

2014.12.15

UG-01097_avst

Subscribe

Send Feedback

Stratix V Avalon-ST Interface for PCIe Datasheet

Altera

®

Stratix

®

V FPGAs include a configurable, hardened protocol stack for PCI Express

®

that is

compliant with PCI Express Base Specification 2.1 or 3.0. The Hard IP for PCI Express using the Avalon

Streaming (Avalon-ST) interface is the most flexible variant. However, this variant requires a thorough

understanding of the PCIe

®

Protocol.

Figure 1-1: Stratix V PCIe Variant with Avalon-ST Interface

Application

Layer

(User Logic)

Avalon-ST

Interface

PCIe Hard IP

Block

PIPE

Interface

PHY IP Core

for PCIe

(PCS/PMA)

Serial Data

Transmission

Table 1-1: PCI Express Data Throughput

The following table shows the aggregate bandwidth of a PCI Express link for Gen1, Gen2, and Gen3 for 1, 2, 4,

and 8 lanes. This table provides bandwidths for a single transmit (TX) or receive (RX) channel. The numbers

double for duplex operation. The protocol specifies 2.5 giga-transfers per second for Gen1, 5.0 giga-transfers per

second for Gen2, and 8.0 giga-transfers per second for Gen3. Gen1 and Gen2 use 8B/10B encoding which

introduces a 20% overhead. In contrast, Gen3 uses 128b/130b encoding which reduces the data throughput lost to

encoding to less than 1%.

Link Width

×1

×2

×4

×8

PCI Express Gen1

(2.5 Gbps)

2

4

8

16

PCI Express Gen2

(5.0 Gbps)

4

8

16

32

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising
This manual is related to the following products: