Altera Stratix V Avalon-ST - Manual (Page 26)

Figure 3-1: Configuration Bypass Mode Qsys Example Design
pcie_reconfig_driver_0
to PCIe Root Port
and Host System
Configuration
Bypass Top
(cfbp_top)
APPS: Config Bypass Example
(cfbp_app_example)
DUT: Hard IP for PCIe
Using Configuration Bypass
Mode Endpoint
Function 0
Function 1
2 MByte Memory
Reset
(rs_hip)
Configuration Space
Configuration Space
Local Management
Interface (LMI)
alt_xcvr_reconfig_0
Function 0 Registers
Function 1 Registers
Copying the Configuration Space Bypass Mode Example Design
Follow these steps to copy the Configuration Space Bypass Mode Qsys Example Design to your working
directory:
1. Copy the example design,
pcie_cfbp_g2x8_ast256.qsys , from the installation directory: <install_dir>/ip/
altera/altera_pcie/altera_pcie_hip_ast_ed/altera_pcie_cfgbp_ed/qsys_example to your working directory.
2. Copy the Qsys wrapper file for the Configuration Space Bypass application logic,
altera_pcie_cfgbp_ed_
hw.tcl , from the installation directory:
<install_dir>/ip/altera/altera_pcie/altera_pcie_hip_ast_ed/altera_pcie_
cfgbp_ed/ to your working directory.
3. Rename the
pcie_cfbp_g2x8_ast256.qsys top.qys . Renaming is necessary because the testbench defines
top.v
as the top-level wrapper. Qsys creates
top.v
from
top.qsys
when you generate the system.
4. Start Qsys by typing
qsys-edit
and open top.qsys when prompted by Qsys.
The following figure shows the complete system.
3-2 Copying the Configuration Space Bypass Mode Example Design
UG-01097_avst
2014.08.18
Altera Corporation Getting Started with the Configuration Space Bypass Mode Qsys Example Design
Send Feedback