Exacqvision software overview, Client/server architecture – Exacq exacqVision Pro User Manual User Manual

Page 11

Advertising
background image

11

www.exacq.com

3

exacqVision Software Overview

Client/Server Architecture

exacqVision software is based on a client/server architecture in which every computer is a client, server, or client/server
combination. These configurations are defined as follows:

A client computer provides access to a remote service on another computer over a TCP/IP network. The
exacqVision Client software is a thick client, and the web browser is a thin client.

A server computer provides services to client computers over the TCP/IP network. An exacqVision server
receives and stores video from cameras; provides audio, video, and data as requested by thick clients; and hosts
a web server (if enabled) for thin clients. The exacqVision Server software does not have a graphical user
interface; only the client software allows interaction. A server can serve multiple simultaneous client
connections, within hardware limitations.

A client/server combination simultaneously operates client and server software. A loopback TCP/IP address of
“localhost” (127.0.0.1) allows the client software to communicate with the server software on the same
computer. exacqVision servers are configured at the factory as a client/server combination to provide a
convenient initial configuration experience.

Advertising
This manual is related to the following products: