Exacq exacqVision Pro User Manual - Manual (Page 56)

56 www.exacq.com
Hardware Tab
The following features are available on the Hardware tab:
1. The Storage Hardware section lists all the RAID controllers and hard drives installed in the system.
2. The Properties section lists properties of the controller or drive selected in the Storage Hardware list.
3. The SMART Attributes list displays the current values and operating threshold of various attributes, as provided
by the hard drive manufacturer. This section is shown for informational purposes only; details about SMART
attributes are available at http://en.wikipedia.org/wiki/S.M.A.R.T.
4. The Thresholds section allows you to modify the temperature thresholds for a hard drive. To do this, click New,
select a hard drive from the Device drop-down list, and enter a minimum temperature and maximum
temperature. Click Apply when finished.
If a drive or controller is in an alarm condition, it is highlighted in red in the Storage Hardware list. Alarm conditions can
include a rebuilding array, high drive temperature, drive verification failure, drive removal, new drive, and more. You can
configure a notification of a drive alarm using the Event Linking feature (see the “Event Linking” section of this manual for
more information).
1
2
3
4