Exacq exacqVision Pro User Manual - Manual (Page 111)

111 www.exacq.com
Video Playback
To play back video, complete a search as described in the previous section and complete the following steps:
1. By default, all searched cameras are selected for video playback. To deselect a camera, click the camera name.
To select a removed camera for playback, click its name again.
2. Click the play button to start displaying video at the beginning of the timeline.
3. To play video starting at another point on the timeline, double-click a recorded video bar in the appropriate
location under the timeline. Or, you can click once on the recorded video bar and then click the Play button.
4. The recorded video bars change color show how much of each camera’s video has been downloaded. To clear
the downloaded video, right-click the timeline and select Clear All Cache or Clear Selected Item(s) Cache
5. To stop video download, click the Stop button. All video downloaded before you pressed the Stop button can
still be viewed.
6. To display a single camera, double-click its video playback window. To return to the multi-camera view, double-
click the remaining video playback window.
7. After the download has started, you can scrub back and forth through the video using the cursor (7a) or video
playback controls (7b). You can quickly scan the video by dragging the cursor to the left or right or by pressing
Enter or Backspace on the keyboard. (Enter and Backspace play every frame of video as quickly as the system
hardware allows, unlike the normal Play and Reverse buttons, which play video at actual speed even if frames
must be skipped to do so.)
1
2
3 4
6
7a
7b
5