Exacq exacqVision Pro User Manual - Manual (Page 23)

23 www.exacq.com

The Update tab allows you to remotely update the exacqVision Server software. The server’s current
exacqVision Server version is listed at the top of the tab. Click Check for Updates; if a newer exacqVision Server
release is available, it will be listed in the Version drop-down list.
After you select an exacqVision Server release, click Update. Update Status tracks the progress of the update.
After your first update, the Last Status will provide information about the most recent update.
NOTE: Alternatively, you can select Show Advanced Options to open the Location field, which contains a
network share location accessible by the client and server. Copy the update list and all server software updates
to the location specified.
Please note the following additional information about remote updates:

The exacqVision system will stop recording for several minutes during the update, and then it will
automatically begin recording when the update is complete.

Available exacqVision Server releases can vary based on the system’s license and subscription status.

Remote updates on the System page require the exacqVision Server and exacqVision Client both to be
connected to the Internet.
 If the server and client are not connected to the Internet, you can copy your license file to a flash drive or
other portable media device. Then upload the license file to the Offline Software Update Packaging Utility
on exacq.com under Support and Downloads.

Send Usage Statistics provides anonymous and non-sensitive information to the manufacturer about how
cameras and exacqVision features are used on the system.