Exacq exacqVision Pro User Manual - Manual (Page 65)

65 www.exacq.com
The following Event Types are available:
NOTE: Input Trigger and Soft Trigger are the only Event Types available on exacqVision Start systems.
Event Type Description
Video Motion Camera detects motion.
Video Loss Analog video signal is disconnected.
Input Trigger Discrete input on hybrid server or IP camera with alarm input is activated.
Serial Port Key word entered on Serial Profile page is detected on a pre-selected port.
Serial Profile Key word is detected on any Serial Port with that profile.
Health Detected problem involving the health of the exacqVision server hardware.
IP Camera Connection Network can’t connect to the IP Camera.
Soft Trigger Signal sent from the client to the server.
Time Trigger Time of day or day of week reached.
Analytics Video analytics event detected.
Source Group Multiple event types for advanced event linking.
The Event Source list varies depending on the Event Type selected:
Event Type Selected Event Source
Video Motion Any of the cameras connected to the exacqVision server.
Video Loss Any analog camera connected to the exacqVision server.
Input Trigger Any input trigger on the back of the server or IP camera connected to the
server. The system defaults to a device and input number, but these can be
customized on the Trigger Input page. See the “Trigger Inputs” section of this
manual for details.
Serial Port Any of the serial ports configured on the server. See the “Serial Ports” section
of this manual for details.
Serial Profile Any of the serial profiles you have configured. You can select all key words
and rules associated with a serial profile by selecting the profile name, or you
can select an individual key word or rule configured in the profile.
Health Includes failures or temperature problems on a device; problems with storage
configuration; subscription expiration; video throttling alarms; alarms related
to parameters monitored on the Hardware Monitoring tab on the System
page; failed connection to shared network drive for archiving.
IP Camera Connection Any of the IP cameras connected to the exacqVision server.
Soft Trigger Select New to create a new soft trigger with a default name. Double-click to
name it, or click Delete to remove it. You can also select any of the pre-
configured soft triggers that are listed.
Time Trigger Select New to open a window. Name the time trigger, select a start and end
time, and select the days of the week when the selected action should occur.
(For example, you could perform an Auto Export at 2:00 every morning.)
Analytics A list of video analytics events (configured through the provider’s interface).
Source Group Select New to open a window. You can then select any combination of event
types and event sources and determine whether any or all of them must
occur to trigger the selected action.