Exacq exacqVision Pro User Manual User Manual
Page 74
74
The Schedule tab on the Archiving page allows you to select the types of data and devices to archive on each archive
server:
On the Days tab, you can configure archiving of all data, motion video (which includes alarm video), or just alarm video to
the selected archive server. To change the Setting, select an archive server and complete the following steps:
1. Select the appropriate tab for the day of the week.
2. In the grid, draw a rectangle that corresponds to the hours for each device that you want to configure.
3. When you hover the cursor over a square, note the details displayed in the Information section.
NOTE: The Record Setting and the Archiving Setting do not have to be configured for the same type of data. For
example, you could record Free Run video on a system at a certain time, but then archive only the motion video
recorded during that period. However, if only motion/alarm video was recorded, the All setting on the archive
page will cause only motion/alarm video to be archived. The amount of video available for archiving cannot
exceed the amount of video recorded during that period.
4. Select the appropriate Setting button.
5. To copy the schedule from one day of the week to another, select the appropriate days of the week in the Copy
Current Configuration section, and then click Set.
6. Click Apply.
1
2
4
5
3
6