Exacq exacqVision Pro User Manual User Manual
Page 112
112
When you play back video associated with POS data, any associated video is displayed in sync with the POS overlay data,
as shown in the following figure. Notice the data displayed on the right for the transaction that was just completed in the
video window. If you searched from more than one serial device, data from each device is displayed on separate tabs.
Unprintable characters are automatically deleted from the serial data display.
In some cases, wind or some other invisible motion sets off the camera. On an analog camera, you can highlight the
motion that triggered the recording to identify the cause by right-clicking anywhere in the playback window and select
View Motion. Blue motion boxes mark the area where the motion occurred. When you want to remove the motion
boxes, right-click in the Video Playback window again and select View Motion to remove the checkmark. NOTE: This
feature is not available on most IP cameras.