Exacq exacqVision Pro User Manual - Manual (Page 40)

40 www.exacq.com
Digital PTZ/Fisheye Tab
1. To enable digital PTZ functions on the Live and Search pages, select the Enable checkbox. This feature is available
even if the camera is not mechanically capable of PTZ functions.
2. Use the Pan/Tilt buttons to point the camera at the desired preset location. If the camera moves too quickly or
too slowly, move the Speed slider left (slower) or right (faster).
3. Adjust the Zoom setting as desired.
4. Enter a name or number for the preset in the Name field.
5. Click New to enable the preset.
6. The preset is listed under Presets. The total number of presets configured and supported is shown under the list.
7. Select a Mode for cameras with exacqVision-supported fisheye lenses. If you select Immervision, additional
drop-down lists appear that allow you to select a model and mounting options.
NOTE: When you create a PTZ preset, it is initially named New_preset_1 by default. Then, if a PTZ preset named
New_preset_1 exists, the next PTZ preset is named New_preset_2. However, if you create a new digital preset, it will also
be named New_preset_1, regardless of whether there is already a PTZ preset with that name. To avoid having both a PTZ
preset and a digital preset with the same name, make sure you enter a unique name for each preset that you create.
2
1
3
4
5
6
7