Tuning and optimizing is-is networks, Configuring is-is route leaking, Configuration prerequisites – H3C Technologies H3C S12500-X Series Switches User Manual

Page 151

Advertising
background image

137

550B

Filtering redistributed routes

IS-IS can redistribute routes from other routing protocols or other IS-IS processes, add them to the IS-IS

routing table, and advertise them in LSPs.
Perform this task to filter redistributed routes. Only routes that are not filtered can be added to the IS-IS

routing table and advertised to neighbors.
To filter redistributed routes:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter IS-IS view.

isis [ process-id ] [ vpn-instance
vpn-instance-name ]

N/A

3.

Filter routes redistributed from

other routing protocols or IS-IS

processes.

filter-policy { acl-number | prefix-list
prefix-list-name | route-policy
route-policy-name } export [ protocol

[ process-id ] ]

By default, IS-IS route
filtering is not configured.

267B

Configuring IS-IS route leaking

Perform this task to control route advertisement (route leaking) between Level-1 and Level-2.
You can configure IS-IS to advertise routes from Level-2 to Level-1, and to not advertise routes from Level-1

to Level-2.
To configure IS-IS route leaking:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter IS-IS view.

isis [ process-id ] [ vpn-instance
vpn-instance-name ]

N/A

3.

Configure route
leaking from Level-1 to

Level-2.

import-route isis level-1 into level-2 [ filter-policy
{ acl-number | prefix-list prefix-list-name |
route-policy route-policy-name } | tag tag ] *

By default, IS-IS advertises
routes from Level-1 to
Level-2.

4.

Configure route
leaking from Level-2 to

Level-1.

import-route isis level-2 into level-1 [ filter-policy
{ acl-number | prefix-list prefix-list-name |

route-policy route-policy-name } | tag tag ] *

By default, IS-IS does not
advertise routes from

Level-2 to Level-1.

62B

Tuning and optimizing IS-IS networks

268B

Configuration prerequisites

Before you tune and optimize IS-IS networks, complete the following tasks:

Configure IP addresses for interfaces to ensure IP connectivity between neighboring nodes.

Enable IS-IS.

Advertising
This manual is related to the following products: