Ospf gr configuration example – H3C Technologies H3C S12500-X Series Switches User Manual

Page 170

Advertising
background image

156

[SwitchC] display isis route

Route information for IS-IS(1)

------------------------------

Level-1 IPv4 Forwarding Table

-----------------------------

IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags

-------------------------------------------------------------------------------

192.168.0.0/24 10 NULL Vlan300 Direct D/L/-

10.1.1.0/24 10 NULL Vlan100 Direct D/L/-

10.1.2.0/24 10 NULL Vlan200 Direct D/L/-

Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set

Level-2 IPv4 Forwarding Table

-----------------------------

IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags

-------------------------------------------------------------------------------

192.168.0.0/24 10 NULL Vlan300 Direct D/L/-

10.1.1.0/24 10 NULL Vlan100 Direct D/L/-

10.1.2.0/24 10 NULL Vlan200 Direct D/L/-

172.16.0.0/16 20 NULL Vlan300 192.168.0.2 R/-/-

Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set

[SwitchD] display isis route

Route information for IS-IS(1)

------------------------------

Level-2 IPv4 Forwarding Table

-----------------------------

IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags

-------------------------------------------------------------------------------

192.168.0.0/24 10 NULL Vlan300 Direct D/L/-

10.1.1.0/24 20 NULL Vlan300 192.168.0.1 R/-/-

10.1.2.0/24 20 NULL Vlan300 192.168.0.1 R/-/-

172.16.0.0/16 10 NULL Vlan100 Direct D/L/-

Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set

The output shows that the routing table of Level-1 switches contains a default route with the next hop as

the Level-1-2 switch. The routing table of Level-2 switch contains both routing information of Level-1 and
Level-2.

Advertising
This manual is related to the following products: