Limiting routes received from a peer or peer group – H3C Technologies H3C S12500-X Series Switches User Manual

Page 283

Advertising
background image

269

# Configure Switch D.

[SwitchD] bgp 200

[SwitchD-bgp] peer 194.1.1.2 as-number 200

[SwitchD-bgp] peer 195.1.1.2 as-number 200

[SwitchD-bgp] address-family ipv4 unicast

[SwitchD-bgp-ipv4] peer 194.1.1.2 enable

[SwitchD-bgp-ipv4] peer 195.1.1.2 enable

[SwitchD-bgp-ipv4] quit

[SwitchD-bgp] quit

4.

Configure attributes for route 1.0.0.0/8, making Switch D give priority to the route learned from
Switch C:

{

(Method 1.) Configure a higher MED value for the route 1.0.0.0/8 advertised from Switch A to
peer 192.1.1.2:
# Define an ACL numbered 2000 to permit route 1.0.0.0/8.

[SwitchA] acl number 2000

[SwitchA-acl-basic-2000] rule permit source 1.0.0.0 0.255.255.255

[SwitchA-acl-basic-2000] quit

# Define two routing policies, apply_med_50, which sets the MED for route 1.0.0.0/8 to 50,

and apply_med_100, which sets the MED for route 1.0.0.0/8 to 100.

[SwitchA] route-policy apply_med_50 permit node 10

[SwitchA-route-policy-apply_med_50-10] if-match ip address acl 2000

[SwitchA-route-policy-apply_med_50-10] apply cost 50

[SwitchA-route-policy-apply_med_50-10] quit

[SwitchA] route-policy apply_med_100 permit node 10

[SwitchA-route-policy-apply_med_100-10] if-match ip address acl 2000

[SwitchA-route-policy-apply_med_100-10] apply cost 100

[SwitchA-route-policy-apply_med_100-10] quit

# Apply routing policy apply_med_50 to the route advertised to peer 193.1.1.2 (Switch C),
and apply_med_100 to the route advertised to peer 192.1.1.2 (Switch B).

[SwitchA] bgp 100

[SwitchA-bgp] address-family ipv4 unicast

[SwitchA-bgp-ipv4] peer 193.1.1.2 route-policy apply_med_50 export

[SwitchA-bgp-ipv4] peer 192.1.1.2 route-policy apply_med_100 export

[SwitchA-bgp-ipv4] quit

[SwitchA-bgp] quit

# Display the BGP routing table on Switch D.

[SwitchD] display bgp routing-table ipv4

Total number of routes: 2

BGP local router ID is 195.1.1.1

Status codes: * - valid, > - best, d - dampened, h - history,

s - suppressed, S - stale, i - internal, e - external

Origin: i - IGP, e - EGP, ? - incomplete

Network NextHop MED LocPrf PrefVal Path/Ogn

Advertising
This manual is related to the following products: