Configuring bgp load balancing – H3C Technologies H3C S12500-X Series Switches User Manual

Page 318

Advertising
background image

304

Interface : Vlan10 Cost : 0

Static Routing table Status : <Inactive>

Summary Count : 0

The output shows that Switch A communicates Switch B through VLAN-interface 10. The link over

VLAN-interface 10 fails.
# Display IPv6 static routes on Switch A again.

<SwitchA> display ipv6 routing-table protocol static

Summary Count : 1

Static Routing table Status : <Active>

Summary Count : 1

Destination: 120::/64 Protocol : Static

NextHop : 10::100 Preference: 65

Interface : Vlan11 Cost : 0

Static Routing table Status : <Inactive>

Summary Count : 0

The output shows that Switch A communicates with Switch B through VLAN-interface 11.

Advertising
This manual is related to the following products: