H3C Technologies H3C S12500-X Series Switches User Manual
Page 245
231
Step Command
Remarks
3.
Enable BGP route refresh for a
peer or peer group.
•
Enable BGP route refresh for the
specified peer or peer group:
peer { group-name |
ip-address }
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer { group-name |
ip-address }
capability-advertise
conventional
Use either method.
By default, BGP route refresh is
enabled.
To enable BGP route refresh for a peer or peer group (IPv6):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view or BGP-VPN
instance view.
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
N/A
3.
Enable BGP route refresh for a
peer or peer group.
•
Enable BGP route refresh for the
specified peer or peer group:
peer { group-name |
ipv6-address }
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer { group-name |
ipv6-address }
capability-advertise
conventional
Use either method.
By default, BGP route refresh is
enabled.
597B
Saving updates
To save all route updates from the specified peer or peer group (IPv4):
Step Command
Remarks
1.
Enter system view.
system-view
N/A