Configuring is-is route filtering, Bgp configuration task list – H3C Technologies H3C S12500-X Series Switches User Manual

Page 200

Advertising
background image

186

RFC 2796, BGP Route Reflection

RFC 3065, Autonomous System Confederations for BGP

RFC 4271, A Border Gateway Protocol 4 (BGP-4)

RFC 4724, Graceful Restart Mechanism for BGP

RFC 4360, BGP Extended Communities Attribute

RFC 4760, Multiprotocol Extensions for BGP-4

70B

BGP configuration task list

In a basic BGP network, you only need to perform the following configurations:

Enable BGP.

Configure BGP peers or peer groups. If you configure a BGP setting at both the peer group and the
peer level, the most recent configuration takes effect on the peer.

Control BGP route generation.

To control BGP route distribution and path selection, you must perform additional configuration tasks.
To configure BGP, perform the following tasks (IPv4):

Tasks at a glance

Remarks

1067H

Configuring basic BGP

:

(Required.)

1068H

Enabling BGP

(Required.) Perform one of the following tasks:

{

1069H

Configuring a BGP peer

{

1070H

Configuring a BGP peer group

(Optional.)

1071H

Specifying the source interface for TCP connections

H3C recommends that
you configure BGP peer

groups on large scale

BGP networks for easy

configuration and
maintenance.

Perform at least one of the following tasks to generate BGP routes:

1072H

Injecting a local network

1073H

Redistributing IGP routes

N/A

(Optional.)

1074H

Controlling route distribution and reception

:

1075H

Configuring BGP route summarization

1076H

Advertising optimal routes in the IP routing table

1077H

Advertising a default route to a peer or peer group

1078H

Limiting routes received from a peer or peer group

1079H

Configuring BGP route filtering policies

1080H

Configuring BGP route dampening

N/A

(Optional.)

1081H

Controlling BGP path selection

:

1082H

Specifying a preferred value for routes received

1083H

Configuring preferences for BGP routes

1084H

Configuring the default local preference

1085H

Configuring the MED attribute

1086H

Configuring the NEXT_HOP attribute

1087H

Configuring the AS_PATH attribute

N/A

Advertising
This manual is related to the following products: