H3C Technologies H3C S7500E Series Switches - Manual (Page 45)

3-6
Authenticati
on mode
Configuration Remarks
Set the local password
Configuring Password
Authentication for Console
Login .
Configure the authentication scheme
Configure a
RADIUS/HWTACAC
S scheme
Configure the AAA
scheme used by the
domain
Remote AAA
authentication
Configure the
username and
password on the AAA
server
Configure the
authentication
username and
password
Scheme
Select an
authentication
scheme
Local
authentication
Configure the AAA
scheme used by the
domain as local
For more information, see
Configuring Scheme
Authentication for Console
Login .
A newly configured authentication mode does not take effect unless you exit and enter the CLI again.
Configuring None Authentication for Console Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .
Configuration procedure
Follow these steps to configure none authentication for console login: