H3C Technologies H3C S7500E Series Switches - Manual (Page 50)

3-11
To do… Use the command… Remarks
Exit to system
view
quit
radius-scheme-name argument,
perform the following configuration
as well:
z For RADIUS and HWTACACS
configuration, see AAA
Configuration in the Security
Configuration Guide.
z Configure the username and
password accordingly on the
AAA server. (For more
information, see AAA
Configuration in the Security
Configuration Guide.)
Create a local user and enter
local user view
local-user user-name
Required
By default, no local user exists.
Set the authentication
password for the local user
password { cipher | simple }
password
Required
Specifies the command level of
the local user
authorization-attribute level level
Optional
By default, the command level is 0.
Specify the service type for the
local user
service-type terminal
Required
By default, no service type is
specified.
Configure common settings for
AUX user interface view
—
Optional
See Configuring Common Settings
for Console Login (Optional) .
After you enable command authorization, you need to perform the following configuration to make the
function take effect:
z Create a HWTACACS scheme, and specify the IP address of the authorization server and other
authorization parameters. For more information, see AAA Configuration in the Security
Configuration Guide.
z Reference the created HWTACACS scheme in the ISP domain. For more information, see AAA
Configuration in the Security Configuration Guide.
After you enable command accounting, you need to perform the following configuration to make the
function take effect:
z Create a HWTACACS scheme, and specify the IP address of the accounting server and other
accounting parameters. For more information, see AAA Configuration in the Security
Configuration Guide.