H3C Technologies H3C S7500E Series Switches - Manual (Page 75)

3-36
To do… Use the command… Remarks
Configure common settings for
VTY user interfaces
—
Optional
See Configuring Common Settings
for VTY User Interfaces (Optional) .
After the configuration, when you log in to the device through modems, you are prompted to press
Enter. A prompt such as <H3C> appears after you press Enter, as shown in Figure 3-21 .
Figure 3-21 Configuration page
Configuring Password Authentication for Modem Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .
Configuration procedure
Follow these steps to configure password authentication for modem login:
To do… Use the command… Remarks
Enter system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—