H3C Technologies H3C S7500E Series Switches - Manual (Page 78)

3-39
To do… Use the command… Remarks
Enable command
accounting
command accounting
Optional
z By default, command accounting
is disabled. The accounting
server does not record the
commands executed by users.
z Command accounting allows the
HWTACACS server to record all
executed commands that are
supported by the device,
regardless of the command
execution result. This helps
control and monitor user
operations on the device. If
command accounting is enabled
and command authorization is
not enabled, every executed
command is recorded on the
HWTACACS server. If both
command accounting and
command authorization are
enabled, only the authorized and
executed commands are
recorded on the HWTACACS
server.
Exit to system view quit —
Enter the
default ISP
domain view
domain domain-name
Configure
the
authentic
ation
mode Apply the
specified AAA
scheme to the
domain
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional
By default, the AAA scheme is
local.
If you specify the local AAA scheme,
perform the configuration
concerning local user as well. If you
specify an existing scheme by
providing the radius-scheme-name